Hårdgörning av trä syftar till att göra materialet hårdare. Detta går att åstadkomma genom komprimering, det komprimerade materialet tenderar dock att återgå mot sin ursprungsform då materialet utsätts för fukt om ingen låsning sker. Låsningen kan ske mekaniskt i en treskiktskonstruktion som motverkar träets fuktrörelser. Dessa skivor har dock visat sig vara instabila och tidigare försök har uppvisat deformationer i form av kupning. Denna undersökning syftar till att utreda förutsättningarna för att använda komprimerad asp samt att ta fram underlag för framtagning av en kommersiell produkt.Praktiska tester har genomförts för att studera hårdhet, återfjädring och densitet hos det komprimerade virket.

Compressed air is a low efficiency media, and is thus very expensive to produce. This thesis work began by mind mapping how to create savings on the compressed air system at Billerud Skärblacka AB. Certain issues have been chosen for further studies.In order to identify the consumption of compressed air at PM 8 and 9, several measurements were made. At PM 8 there were not found any pressure drop, only large pressure variations for short periods of time. The causes of these pressure variations were not established.

The study was carried out as a time study of five wood chippers placed on trucks,so?called huggbilar. They are trucks with built?in wood chipper, chip bowl and crane pulling a chip trailer. The system is used for chipping wood fuel, transporting, and delivering the chips to heating plants.

Wood pellets are an upgraded product of residuals from several wood processing industries, for example saw mills and pulp industries. The pellets are produced by pressing the milled and dried sawdust to cylindrical units with a higher density than the initial raw material. Pellets have great benefits compared to the raw material: high energy per volume, good transport and storage properties and homogeneity. Several parameters collaborate in the whole process, which makes it complex. Wood is a heterogeneous material, chemically and structurally dependent on wood parts, habitat and storage procedures.

The aim of this study was to quantify the productivity and the costs of different harvesting systems (teams), containing harvesters equipped with accumulating harvester heads and forwarders, in first commercial thinnings were an integrated harvest of pulpwood and energy wood were performed. In the beginning the plan was to study and measure 20 sites before and after harvest. Due to storms during the summer of 2010, complete data could only be obtained from 8 of these 20 sites. Seven of these sites were privately owned and one was owned by UPM, all of the sites had been pre-commercially thinned. The mean stem density before harvest was 2578 stems per ha and the mean stem volume was 0.074 m3solid over bark.On average 1518 stems/ha was harvested.

Tropical rain forests only cover around six percent of the world?s land area and contain around 70 % of the world´s animals and plants. Tropical rainforests have been, and still are, negatively affected by human activities. These activities lead to forest degradation which has negative impacts on production and biodiversity. Between 1970-1980 forests in Borneo, Sabah, Malaysia, was subjected to intense logging.

Piles of deadwood are often retained in forests after management to support the biodiversity ofsaproxylic organisms which depend on deadwood to survive. Any knowledge about the crucial role ofpiles as suitable habitat of saproxylic organisms compared to single distributed deadwood objects thatare around the piles would help conservation actors to motivate more forest owners to supportsaproxylic organisms during their management. Therefore to give facts to this the saproxylic fauna ofdifferent pile positions (up and low) was studied and compared to distributed deadwood samplesaround each pile. Our study was focused on saproxylic beetles. Some other parameters such asdiameter, deadwood volume, pile volume and decay stage were assessed to define any effect.

In this work an assessment of the compressed air system in the facilities of Vattenfall Heat Uppsala has been conducted. The facilities constitutes, among others, a combined heat and power plant, and two waste incineration plants. The compressed air is supplied primarily by seven rotary screw compressors and yearly electric energy consumption in these has been determined. Furthermore, the usage of compressed air has been mapped in order to find processes with energy savings potential. Several suggestions how to reduce the usage of compressed air have been presented, resulting in decreased need of electric energy and reduced CO2-emissions.The results show that total need of electric energy in the compressors, during a standard production year, amounts to 5.83 GWh.

The wide distribution range of our boreal pine (Pinus sylvestris L.) provides a great variation in growing conditions and climate/weather factors that influence the wood development of the trees. A great number of extensive studies have been conducted over the years in order to clarify growth trends of this and other species over more or less wide-ranging areas. In this thesis effects of weather factors were instead compared between different forest stands from the about same geographical location. The effects of precipitation, temperature and frost on the year ring characteristics of pine were studied in the research forest of Svartberget Vindeln, in northern Sweden. The stands differed in site index and silvicultural treatment; fertile ? high stem density, fertile ? low stem density, poor ? high stem density and poor ? low stem density.

This report is written on the assignment by Nexans IKO Sweden AB in Grimsås which is a cable manufacturing company. Nexans IKO Sweden AB was in need of help to examine possibilities for saving energy by saving compressed air, in first place by using the compressed air more efficient. The task was to determine the present situation, making the airwipe stations more efficient by reducing the consumption of the compressed air and in turn save money. Even the aspects of the working environment were discussed as the noise levels from the pneumatic systems and engines are usually high. A schedule over the airflow in the factory and the inventory over current airwipessituation was made.

In this study, the effects of using fine milled cassava stems as an additive in biofuel pellet production was compared to the effects of refined starch addition. The bulk biomass fuel raw material, to which the additive was added, was a blend of spruce and pine sawdust. An experimental design in the factors cassava/starch content, moisture content and material temperature was used. Measured responses were pellet bulk density, pellet durability, amount of fines, pelletizer motor current, pellet temperature, die temperature and CV for pelletizer motor current (a measure of process stability). Each response was modeled by multiple linear regression (MLR).

?Development of Norway spruce, Douglas fir beech and Scots pine with a larch shelter wood? is a report written by Per-Olof Magnusson. The thesis is a compulsory part of forest engineer program at ?Skogsmästarskolan?, SLU, Skinnskatteberg, Sweden. The purpose of this report is to describe and evaluate an experiment with hybrid larch (Larix x eurolepis) as shelter wood, and different tree species growth and survival depending on the density of the shelter wood. The experiment is conducted by southern Swedish forest research centre, faculty of forestry, SLU in Alnarp. The hybrid larch ought to be an interesting alternative to birch (Betula sp.) as shelterwood on suitable sites in southern Sweden.

To save energy it?s popular to build houses with low energy loss. In these houses the walls are keeping a lower temperature in the external side which leads to a higher relative humidity. In addition more material, such as wood studs, are used which means that there is more moisture to dry. More moisture in combination with higher relative humidity may pose a higher risk of microbial growth.

The purpose of this study was to compare naturally regenerated Scots pine (Pinus sylvestris (L.)) against seeded Scots pine in terms of benefits and differences. An inventory was performed at a number of different sites, 4 ? 6 years after soil scarification and data on the number of new established plants, their height growth as well as ground-line diameter was collected. Information about site conditions such as altitude, quarter exposure and frost risk was also collected. A review of previous studies was conducted in addition to the field study.

The purpose of this study is to explain how the value of sawn wood changes when sawn wood are cut in 30 respective 60 cm lengths. The raw material into the saw mill will mainly be bucked in 30cm and 60 cm modules. There will also be two alternatives where the timber will be bucked special lengths, 370, 490 and 550 cm but also in 490 and 550 cm.The method used for the study is to simulate both cutting and sawing the woods. For cutting the simulator Timan is used and for sawing the simulator Timberopt is used. When data is generatedfrom the simulators, calculations of some key figures is done and also how much the revenue need to be increased for the sawn wood in order to cover for the increased costs of changing sawn woodfrom 30 cm to 60 cm modulesThe conclusion is that the single biggest reason, impacting the value of the sawn wood is the cutting at the saw mill.When going from 30 to 60 cm modules, the impact will be that the customers to the saw mill must pay more to increase the revenue by at least 10% for the sawn wood in order to justifice the changein production.It is also possible to increase the value of the products further by bucking the timber in three lengths, 370, 490 and 550 cm, in order to get 12 % increase of the share of longer sawn wood (>= 480 cm)..